Thermal Store Cylinders
Available both in cylinder and combination style, the thermalstore unit provides hot water via a mixing valve at high pressure supplied direct from the mains water supply. Requiring only access to a cold water mains supply and a facility to overflow to the outside (direct from the combination units and from a header tank for cylinder units), the thermalstore unit can be located almost anywhere within the dwelling or business premise. Simple to install with no requirement for an unvented certificate, the thermalstore unit offers far greater flexibility than the traditional vented unit.
Thermal Store Cylinder sizes
- 140 ltr - Size 1050 x 450 exc insulation
- 180 ltr - Size 1300 x 450 exc insulation
- 210 ltr - Size 1500 x 450 exc insulation
- 250 ltr - Size 1500 x 500 exc insulation
Combination Thermal Store Cylinder sizes
- 140 ltr - Size 1320 x 450 exc insulation
- 180 ltr - Size 1570 x 450 exc insulation
- 210 ltr - Size 1770 x 450 exc insulation
- 250 ltr - Size 1770 x 500 exc insulation
All thermastore units are supplied with immersion heaters (two on direct models), drain valve, expansion vessel,
thermostatic blending valve & ball valve (combination model only). Optional extras such as aqua control thermostat,
pressure reducing valve and inline strainer are available if the customer requires.
Approximately 40 - 50mm foam insulation is applied as a standard, giving heat loss performance well above that
required by Part L.
We also manufacture a cased thermal store unit.
We can also manufacture bespoke thermalstore units or replicate replacement units to suit the customers requirements.
Alternative heights and diameters are also available where space or water volumes are critical.
Thermalstore dimensions
Indirect (left) and Direct (right) Thermal Stores
| Thermalstore Cylinder Connections | |
|---|---|
| Letter on Diagram | Connection type |
| A | Cold mains in |
| B | Mixer hot water out |
| C | Immersion heater |
| D | Drain connection |
| E | Control thermostat connection (indirect only) |
| F | Direct boiler connection (if applicable) |
| G | To space heating (direct only if applicable) |
| G | Boiler connection (indirect only) |
| H | Store fill connection |
| I | Store vent connection |
Indirect Combination (left) and Direct Combination (right) Thermal Stores
| Thermalstore Cylinder Connections | |
|---|---|
| Letter on Diagram | Connection type |
| A | Cold mains in |
| B | Mixer hot water out |
| C | Immersion heater |
| D | Drain connection |
| E | Control thermostat connection (indirect only) |
| F | Direct boiler connection (if applicable) |
| G | To space heating (direct only if applicable) |
| G | Boiler connection (indirect only) |
