Marine Cylinders
Marine calorifiers are manufactured in a wide range of configurations to meet the diversity of applications and installations required of boat builders and fitters.
Manufactured in either vertical or horizontal format and factory insulated, marine cylinders can be supplied with single coil or, twin coils where dual heat sources such as engine and solid fuel or gas boiler are available. This together with the option of configuring connections all on one side or in one end, our marine calorifiers afford the boat designer and builder exceptional flexibility in often confined situations.
Heavier gauge copper is used throughout giving these calorifiers a working pressure of 3 bar suitable for most marine applications. Improved specifications are available where higher operating pressures are required. Available in a range of diameters from 300mm to 600mm and standard heights from 450mm to 900mm. The table below demonstrates the standard sizes available. Other options are available to meet special requirements.
Marine Cylinder Dimensions
| Cylinder Connections | |
|---|---|
| Letter on Diagrams | Connection type |
| A | 1/2"male connection cold feed in |
| B | 1/2" male connection hot draw off |
| C | 1/2" male connection primary flow in |
| D | 1/2" male connection primary return out |
| E | 1/2" male connection expansion valve |
| F | 2.1/4" female immersion connection |
| G | 1/2" male connection auxilary primary flow |
| H | 1/2" male connection auxilary primary return |
